For the long-tail query “TPU 95A filament OEM wholesale cable grommets”: print farms, service bureaus and small-batch lines ask for a cable grommet or strain-relief boot. The RFQ often says “just the 85A foot spool” or “just the 18 Sep lid seal.” The part snaps into a panel hole and must survive cable pull. It is not a printer foot and not a full lid gasket. Catalog TPU 95A: seals, wheels, grips, about 8 colors including clear, impact about 120 kJ/m², 210–240°C with a 40–60°C bed. TPU 85A is softer, about 3 colors, for feet. TPU 98A is firmer for casters. No dental or implant work. No untested food contact, UL, or flex-cycle count.
Across the six buyer scenes, farm cable boots, bureau strain reliefs and fixture-panel grommets should not default to 85A or share a bin with lid seals. Printer feet stay on the 21 Sep 85A note. Lid rings stay on 18 Sep. A board grommet that must clip and flex is today’s TPU 95A OEM. Quote the three jobs apart.
TPU likes direct drive, slow retract and dry storage. Mark the spool TPU 95A / cable grommet / strain relief so it is not binned with 85A feet or 95A lid stock. Samples are 1–2 rolls. Print the buyer’s hole, pull a cable a few times, then lock the OEM. Numbers stay on the lot TDS.
Qianshuo is the company. QSENCE is Qianshuo’s filament brand. Own compounding and 20 extrusion lines, 500 tons a month. TPU 95A OEM, FOB Foshan, MOQ usually 50 kg, TDS/COA/MSDS, private label. Lock a black 50 kg lot on one real grommet before branding.
Order check: cable grommet or strain boot → TPU 95A. Printer feet → 85A. Full lid seal → 18 Sep. Firmer casters → 98A. Print one real grommet from 50 kg, then compare unit price.
Email for a quote: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.
OEM view: cable grommets, TPU 95A vs 85A / lid seals
| Compare | TPU 95A (cable grommet) | TPU 85A | TPU 95A lid seal |
|---|---|---|---|
| Job | Panel grommets, strain-relief boots | Printer feet | Full lid gasket rings |
| Feel | Clips, tough, cable pull | Softer, must squash | Seals, must not collapse |
| Colors | About 8 incl. clear | About 3 | Same resin, different part |
| 210–240°C / bed 40–60°C, direct drive | Same window, jams easier | Same window | |
| Docs | TDS / COA / MSDS | Yes | Yes |
| OEM start | 50 kg | 50 kg | 50 kg |
Compare: 18 Sep lid gaskets · 21 Sep printer feet · TPU 95A product page.
Qianshuo is the company. QSENCE is Qianshuo’s filament brand. Own compounding and 20 extrusion lines, 500 tons a month. Samples 1–2 rolls. FOB Foshan. evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.