A color outside the four leaves Matte PETG — that color sits on PETG

Two unlabeled spools apart on a packing table, one matte gray and one glossy blue

A color outside the four leaves the Matte PETG card. That color sits on PETG. We sell FOB Foshan. The factory is in Foshan, Guangdong, next to Guangzhou.

The numbers are the catalog. Matte PETG: heat deflection 70°C, impact 30 kJ/m², flexural 65 MPa, print 230–250°C, bed 70–85°C, 4 colors. That card is the low-glare PETG for display parts, enclosures, functional shells and OEM. PETG: heat deflection 70°C, impact 32 kJ/m², flexural 64 MPa, print 230–250°C, bed 70–85°C, about 18 colors, 1.75 mm and 2.85 mm, ±0.03 mm, for functional parts, fixtures, containers and OEM. The print window matches. The bed matches. The heat number matches. Writing a fifth color onto the Matte PETG line does not add that color to the 4-color card. Moving the shell onto PETG for the color leaves the matte face behind. The Matte PETG card does not print a diameter line. This note does not add one.

Each card is 1–2 sample rolls, then its own 50 kg. The cards do not share one 50 kg. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch, in Foshan next to Guangzhou, is the capacity behind either line. Ocean freight stays on the buyer’s forwarder. FOB Foshan. This note does not add a medical or dental use.

Order check: the shell must stay low-glare, and the color is one of the four → Matte PETG, then 50 kg. The shell needs a color outside those four, and a standard PETG face is acceptable → PETG, then 50 kg. The shell needs a fifth color and a matte face → no single stock card on this catalog holds both. Both cards → two lines.

Email for a quote: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.

Two filament strands on kraft paper, one dull gray Matte PETG and one glossy blue PETG
The gray strand is Matte PETG. The blue strand is a color that sits on PETG. FOB Foshan.
Two open cartons on a warehouse pallet, one matte gray spool and one glossy blue spool
Two cartons on one pallet. The matte spool is Matte PETG. The colored spool is PETG. Each carton is its own 50 kg. FOB Foshan.

Which card the color takes

Matte PETGPETG
WhenThe shell must stay low-glare, and the color is one of the fourThe shell needs a color outside those four, and a standard PETG face is acceptable
HDT70°C70°C
Impact30 kJ/m²32 kJ/m²
Flexural65 MPa64 MPa
Print / bed230–250°C / 70–85°C230–250°C / 70–85°C
Colors4About 18
DiameterThe card does not print one1.75 mm and 2.85 mm · ±0.03 mm
The 50 kgIts own line after 1–2 sample rollsIts own line after 1–2 sample rolls

Grades: Matte PETG · PETG. Compare: a 70°C shell that cannot glare.

Factory in Foshan, next to Guangzhou. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch. Samples 1–2 rolls, then 50 kg on the card the line names. FOB Foshan. evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.

← Back to articles