A fluorescent yellow or orange kit takes the PLA+ card. A solid education color the PLA card stocks stays on PLA. We sell FOB Foshan. The factory is in Foshan, Guangdong, next to Guangzhou.
The numbers are the catalog. PLA+: heat deflection 58°C, impact 35 kJ/m², flexural 72 MPa, print 190–220°C, bed 50–60°C, 10 colors, including fluorescent yellow and fluorescent orange. That card is the tougher PLA for functional prototypes, education, consumer parts and OEM. PLA: heat deflection 57°C, impact 26 kJ/m², flexural 75 MPa, print 190–220°C, bed 50–60°C, about 10 colors, 1.75 mm and 2.85 mm, ±0.03 mm, for education, prototypes, figurines and OEM. The print window matches. The bed matches. The PLA card does not name fluorescent yellow or fluorescent orange. Writing those two names onto the PLA line does not add them to the PLA card. Moving the kit onto PLA+ for those colors leaves 35 kJ/m² and 58°C on that line. The PLA+ card does not print a diameter line. This note does not add one.
Each card is 1–2 sample rolls, then its own 50 kg. The cards do not share one 50 kg. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch, in Foshan next to Guangzhou, is the capacity behind either line. Ocean freight stays on the buyer’s forwarder. FOB Foshan. This note does not add a medical or dental use.
Order check: the kit must be fluorescent yellow or fluorescent orange → PLA+, then 50 kg. The kit is a solid education color the PLA card stocks, and 26 kJ/m² is enough → PLA, then 50 kg. Both cards → two lines.
Email for a quote: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.

Which card the kit color takes
| PLA+ | PLA | |
|---|---|---|
| When | The kit must be fluorescent yellow or fluorescent orange | A solid education color the PLA card stocks, and 26 kJ/m² is enough |
| HDT | 58°C | 57°C |
| Impact | 35 kJ/m² | 26 kJ/m² |
| Flexural | 72 MPa | 75 MPa |
| Print / bed | 190–220°C / 50–60°C | 190–220°C / 50–60°C |
| Colors | 10, including fluorescent yellow and fluorescent orange | About 10; the card does not name those two |
| Diameter | The card does not print one | 1.75 mm and 2.85 mm · ±0.03 mm |
| The 50 kg | Its own line after 1–2 sample rolls | Its own line after 1–2 sample rolls |

Grades: PLA+ · PLA. Compare: a gift that has to shine · a drop on PLA+.
Factory in Foshan, next to Guangzhou. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch. Samples 1–2 rolls, then 50 kg on the card the line names. FOB Foshan. evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.