A housing color outside black and white leaves the ABS card. That color line sits on PETG. We sell FOB Foshan. The factory is in Foshan, Guangdong, next to Guangzhou.
The numbers are the catalog. ABS: heat deflection 87°C, impact 39 kJ/m², flexural 62 MPa, print 230–260°C, bed 90–110°C, 2 colors. The card names those colors as black and white, for housings and fixtures. PETG: heat deflection 70°C, impact 32 kJ/m², flexural 64 MPa, print 230–250°C, bed 70–85°C, about 18 colors, 1.75 mm and 2.85 mm, ±0.03 mm, for functional parts, fixtures and containers. The bed does not match. The heat number does not match. Writing a third color onto the ABS line does not add that color to the ABS card. Moving the housing onto PETG for the color leaves 70°C on that line, not 87°C. The ABS card does not print a diameter line. This note does not add one.
Each card is 1–2 sample rolls, then its own 50 kg. The cards do not share one 50 kg. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch, in Foshan next to Guangzhou, is the capacity behind either line. Ocean freight stays on the buyer’s forwarder. FOB Foshan. This note does not add a medical or dental use.
Order check: the housing is black or white, and 87°C is the number → ABS, then 50 kg. The housing needs a color outside black and white, and 70°C is enough → PETG, then 50 kg. The line needs 87°C and a third color → no single card on this catalog holds both. Both cards → two lines.
Email for a quote: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.

Which card the housing color takes
| ABS | PETG | |
|---|---|---|
| When | The housing is black or white, and 87°C is the number | The housing needs a color outside black and white, and 70°C is enough |
| HDT | 87°C | 70°C |
| Impact | 39 kJ/m² | 32 kJ/m² |
| Flexural | 62 MPa | 64 MPa |
| Print / bed | 230–260°C / 90–110°C | 230–250°C / 70–85°C |
| Colors | 2; the card names black and white | About 18 |
| Diameter | The card does not print one | 1.75 mm and 2.85 mm · ±0.03 mm |
| The 50 kg | Its own line after 1–2 sample rolls | Its own line after 1–2 sample rolls |

Grades: ABS · PETG. Compare: a part that stays outside · a 70°C container.
Factory in Foshan, next to Guangzhou. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch. Samples 1–2 rolls, then 50 kg on the card the line names. FOB Foshan. evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.