A bio-based line takes the PHA card — 26 kJ/m² stays on PLA

Two unlabeled filament spools apart on a packing table, one translucent and one opaque

A bio-based line takes the PHA card. The classroom line keeps PLA, and PLA’s 26 kJ/m² stays on that card. We sell FOB Foshan. The factory is in Foshan, Guangdong, next to Guangzhou.

The two cards do not share one 50 kg. PHA on our card: heat deflection above 85°C, impact 5–15 kJ/m², flexural 18–23 MPa, print 200–210°C, bed 20–70°C, about 18 colors, 1.75 mm, ±0.05 mm, catalog speed 200–300 mm/s. That card describes the grade as bio-based, and it writes marine, soil and compost pathways on the card itself. Those words are the card. They are not a certificate number. PLA on our card: heat deflection 57°C, impact 26 kJ/m², flexural 75 MPa, print 190–220°C, bed 50–60°C, about 10 colors, 1.75 mm and 2.85 mm, ±0.03 mm, for education, prototypes and OEM starter lines. A part that needs 26 kJ/m², ±0.03 mm, or a 2.85 mm path stays on PLA. Putting the word bio-based on a PLA spool leaves the PLA numbers where they are.

Each card is 1–2 sample rolls, then 50 kg. PHA samples are 1.75 mm, the diameter written on the PHA card. PLA samples follow the diameter that will run, 1.75 mm or 2.85 mm. Private label can sit on a card after the samples of that card have been printed. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch, in Foshan next to Guangzhou, is the capacity behind either line. Ocean freight stays on the buyer’s forwarder. FOB Foshan. This note does not add a medical or dental use.

Order check: the line is bio-based and can live with impact 5–15 kJ/m² on 1.75 mm at ±0.05 mm → PHA, then 50 kg. The line needs 26 kJ/m², ±0.03 mm, or 2.85 mm → PLA, on its own 50 kg. Both cards → two lines.

Email for a quote: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.

Two strands, two cards. The bio-based line is PHA. The 26 kJ/m² line is PLA. FOB Foshan.

Which card the line takes

PHA cardPLA card
WhenThe line says bio-basedEducation, prototypes, OEM starter lines
HDTAbove 85°C57°C
Impact5–15 kJ/m²26 kJ/m²
Flexural18–23 MPa75 MPa
Print / bed200–210°C / 20–70°C190–220°C / 50–60°C
Diameter1.75 mm · ±0.05 mm1.75 mm and 2.85 mm · ±0.03 mm
ColorsAbout 18About 10
The 50 kgIts own line after 1–2 sample rollsIts own line after 1–2 sample rolls
Two cartons on one pallet. Each carton is its own 50 kg. FOB Foshan.

Grades: PHA · PLA.

Factory in Foshan, next to Guangzhou. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch. Samples 1–2 rolls, then 50 kg on the card the line names. FOB Foshan. evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.

← Back to articles