The next 50 kg of the grade that ran out is the order. A published market forecast is not that order. We sell FOB Foshan. The factory is in Foshan, Guangdong, next to Guangzhou.
Two public notes, and neither one is our quote. Grand View Research, in its 3D printing filament market report last updated June 2026, puts the global filament market at USD 1.1 billion in 2025, USD 1.5 billion in 2026 and USD 7.1 billion by 2033, with a 25.4% compound rate from 2026 to 2033. In that note, plastics were 61.3% of 2025 revenue and PLA was 38.6%. Mordor Intelligence puts 2025 at USD 1.07 billion, 2026 at USD 1.28 billion and 2031 at USD 3.16 billion, with a 19.75% compound rate from 2026 to 2031, and puts plastics near 72% in 2025. The later-year totals do not match. Those figures are their estimates. They are not a spool price, not a freight rate, and not a line on a purchase order. Pages: https://www.grandviewresearch.com/industry-analysis/3d-printing-filament-market and https://www.mordorintelligence.com/industry-reports/3d-printing-filament-market.
What a shop can lock is the card that already empties. PLA on our card: heat deflection 57°C, impact 26 kJ/m², flexural 75 MPa, print 190–220°C, bed 50–60°C, about 10 colors, 1.75 mm and 2.85 mm, ±0.03 mm, for education, prototypes and OEM starter lines. PETG: heat deflection 70°C, impact 32 kJ/m², flexural 64 MPa, print 230–250°C, bed 70–85°C, about 18 colors, both diameters, ±0.03 mm, for functional parts, fixtures and containers. Each card is 1–2 sample rolls, then 50 kg on one diameter. PLA and PETG stay two lines.
The value on this factory’s side of a filament trade is that second 50 kg. A spool is used up; the next spool of the same grade is the reorder. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch, in Foshan next to Guangzhou, is the capacity behind that reorder. It is not a claim that this factory is the market in those reports. Private label can sit on the grade after the samples of that grade have been printed. Ocean freight stays on the buyer’s forwarder. FOB Foshan. The same public notes also publish shares for aerospace and medical uses. Those shares are their categories. They are not a grade on the order we write here.
Order check: the shelf already empties PLA → 1–2 sample rolls, then 50 kg PLA on one diameter. The shelf empties PETG → the same path on PETG. Both grades → two lines. Do not replace that path with either house’s later-year total.
Email for a quote: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.

What the shop can lock
| What the shop locks | What a forecast does not ship | |
|---|---|---|
| Public notes | Grand View and Mordor, cited above. Not our price | Not a 50 kg line |
| PLA | HDT 57°C · impact 26 kJ/m² · flex 75 MPa · 190–220°C / bed 50–60°C · ~10 colors · ±0.03 mm | Its own 50 kg after 1–2 sample rolls |
| PETG | HDT 70°C · impact 32 kJ/m² · flex 64 MPa · 230–250°C / bed 70–85°C · ~18 colors · ±0.03 mm | Its own 50 kg, not mixed into the PLA line |
| The repeat | Next 50 kg of the grade that ran out | A later-year market total |
| Freight | FOB Foshan | Ocean freight stays on the buyer’s forwarder |

Factory in Foshan, next to Guangzhou. 7 filament lines, 400 kg a day on one line and 2.8 tons a day when all 7 run, with in-house material development and color masterbatch. Samples 1–2 rolls, then 50 kg of the grade that ran out. FOB Foshan. evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.