If the display photo cannot glare, order PLA Matte. Order PLA Silk when the buyer asked for silk sheen. In the catalog these are two PLA finishes, not one spool. We sell FOB Foshan.
PLA Matte: a low-glare surface, 5 colors — white, grey, black, red and yellow. HDT 57°C, impact 24 kJ/m², flexural 70 MPa, print 190–220°C, bed 50–60°C. PLA Silk: a silk sheen, 12 colors, including metallic and cream tones. HDT 58°C, impact 18 kJ/m², flexural 72 MPa, print 200–230°C, bed 50–60°C. The heat numbers sit next to each other. Impact is lower on Silk, 18 against 24. A clip that needs impact stays off the Silk spool.
A line that only says “PLA” does not pick the finish. Write Matte or Silk, and a color from that grade’s list. Matte does not carry the silk color range. Silk does not have a matte surface. If the part needs neither sheen nor a matte face, standard PLA is 10 colors, HDT 57°C, impact 26 kJ/m², flexural 75 MPa, print 190–220°C, bed 50–60°C.
Qianshuo is the company. QSENCE is Qianshuo’s filament brand. Own compounding and 20 extrusion lines, 500 tons a month. 1.75 mm ±0.03 mm, TDS/COA/MSDS, private label, FOB Foshan. If this finish has not been printed on their machines: 1–2 sample rolls, then the usual 50 kg.
Order check: the photo or the shop light must not glare → PLA Matte. The buyer asked for sheen → PLA Silk. Neither finish, just a standard color → standard PLA. Finish never printed here → samples, then 50 kg.
Email for a quote: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.
Which finish to write on the purchase line
| PLA Matte | PLA Silk | |
|---|---|---|
| Surface | Matte, low glare | Silk sheen |
| Colors | 5: white, grey, black, red, yellow | 12, including metallic and cream tones |
| HDT | 57°C | 58°C |
| Impact | 24 kJ/m² | 18 kJ/m² |
| Flexural | 70 MPa | 72 MPa |
| Print / bed | 190–220°C / 50–60°C | 200–230°C / 50–60°C |
| When | The photo or shop light must not glare | The buyer asked for silk sheen |
Grades: PLA Matte · PLA Silk · PLA.
Qianshuo is the company. QSENCE is Qianshuo’s filament brand. 20 extrusion lines, 500 tons a month. Samples 1–2 rolls. FOB Foshan. evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.