Winning long-tail focus: “TPU 95A filament OEM wholesale gaskets”. 95A is the hardness most buyers can turn into a wholesale SKU — easier to feed and diameter-control than 85A, yet soft enough for seals, grips, cable boots, and light damping pads.
Channel logic: print-farm accessory kits, electronics/instrument seal samples, wearable soft edges. Lead with black / white / tinted clear before expanding colors. On the same part, compare against PETG “fake flex” and 85A “too soft to print well” — hardness plus yield closes deals faster than Shore numbers alone.
Print notes: dry filament and use a direct-drive path; slow feed and control cooling to cut stringing; validate compression set and interference fit before locking an OEM seal SKU.
OEM packaging: vacuum + desiccant; mark TPU 95A and color clearly so warehouse staff do not mix with 85A / 98A.
Qianshuo supplies 1.75 mm ±0.03 mm laser-controlled TPU 95A, FOB Foshan, typical MOQ 50 kg, with TDS/COA/MSDS on request. Samples 1–2 spools per color.
Explore the product page and request FOB pricing this week: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568.
OEM view: TPU 95A vs 85A / PETG
| Compare | TPU 95A | TPU 85A | PETG |
|---|---|---|---|
| Feel / sealing | Soft & controllable | Softer | Rigid (not elastic) |
| Farm printability | Better | Harder | Easy |
| Typical parts | Gaskets / grips / boots | Damping / ultra-soft | Shells / clips |
| OEM starter colors | Black / white / tinted clear | Fewer | Wider |
Key specs
| Item | Typical |
|---|---|
| Diameter | 1.75 mm ±0.03 mm |
| Nozzle / bed | 210–240 °C / 40–60 °C |
| Best for | Gaskets / grips / boots |
| Docs | TDS / COA / MSDS |
View TPU 95A product page (TPU 95A filament OEM wholesale gaskets) →
Samples / FOB Foshan: evans@qs3dprinterfilament.com · WhatsApp +852 5307 0568